Dry Treat STAIN-PROOF Paver Enhancing Sealer 1Gal

NEW! STAIN-PROOF® Paver Enhancing Sealer offers both rich color enhancement and water and liquid protection through a patented combination of silicone technology. The result is a long-lasting, penetrating oil and water repellent that deepens and enriches the natural color of concrete pavers, cement tiles, terrazzo floors, and cement surfaces.
 
Application instructions
ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to check results. 
Ensure surfaces to be treated are dry, clean and free of residues and the surface temperature is between 40 - 95°F (5 - 35°C).
Using a low-pressure hand sprayer, foam roller, or similar, apply one or more even coat(s). Avoid contact with surrounding areas. Additional coats may be applied at minimum 30 minute intervals.
Estimated total application rate: 1 quart per 80 sq.ft. (8 sq.m.) Application rate will vary depending on surface absorption and number of coats.
Remove all excess then after 30 minutes a 2nd coat may be applied.
If sprayed, product must be backrolled into surfaces before 30 minute dwell on all coats.
Clean equipment with acetone.
Protect from moisture (e.g. rain) for a minimum of 12 hours. Surface may be used with care 12 hours after application.